home *** CD-ROM | disk | FTP | other *** search
- Kurzweil K-Series Pressure Map / Bank
- --------------------------------------------------
-
- Pressure Map Bank (All Banks)
- - loads all Pressure Maps from all banks
-
- Pressure Map Bank (One Bank)
- - load all Pressure Maps from the
- selected bank
- - Use PCH # 0 - 9 to load all of the
- Pressure Maps from Bank 0 - 9
- - Use PCH # 10 - 19 to load only the RAM
- Pressure Maps from Bank 0 - 9
-
- Pressure Map
- - load a single Pressure Map
- - Use the PCH # to seect the Pressure
- Map to load
-
- * IMPORTANT! For the K2500 a
- MINIMUM ROM version of 2.64 is
- required or the software will not work
- properly!
-
- * Match the Comm to the units SysEx Id
- - Press the MIDI button
- - Press the RECV button
- - The Comm Ch should be set to one
- greater than the SysEX ID
- eg. if SysEx ID is 0, set Comm Ch to 1
-
- * Tested using K2500 ROM v2.64
-
-
-